LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Galant ES >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnostic Testing >> Code 11, 12, 13 Or 14: Wheel Speed Sensor Open Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 11, 12, 13 Or 14: Wheel Speed Sensor Open Circuit

NOTE: Codes 11, 12, 13 & 14 are displayed when sensor with open circuit is identified.
  1. Inspect condition of suspected speed sensor. Ensure tip of speed sensor is clean. Disconnect sensor harness connector. Using ohmmeter, measure resistance between harness connector terminals. If resistance is 1000-1200 ohms, go to next step. If resistance is not within specification, replace sensor and retest.
  2. Trouble code will set if ECU detects wheel speed sensor(s) has open circuit. Check continuity of circuit between ECU and sensor. See WIRING DIAGRAM. Repair wiring as needed.
scientia non olet · About LEMON Manuals