LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Montero LS, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails & Injectors >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Rails & Injectors: Removal

  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect negative battery cable. Remove air intake hose. Remove accelerator cable adjusting bolts. On A/T models, remove throttle control cable. On all models, remove accelerator cable. Label and disconnect all vacuum hoses from throttle body and upper intake manifold (air intake plenum).
  2. Remove EGR pipe and gasket. Remove ignition coil (if necessary). Remove engine oil filler neck bracket. Disconnect PCV hose. Remove throttle body leaving coolant hoses connected. Remove throttle body gasket. Remove front and rear intake plenum brackets. Remove intake plenum mounting bolts. Remove intake plenum and gasket.
  3. Disconnect high pressure fuel hose at fuel rail. Disconnect fuel return hose. Disconnect vacuum hoses. Disconnect injector electrical connectors. Remove fuel rail bolts and lift fuel rail and injectors from engine. Injectors may be removed after fuel rail is removed from intake manifold.
scientia non olet · About LEMON Manuals