LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> 3000GT Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Tests >> Scan Tool Will Not Communicate
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Will Not Communicate

  1. Using DVOM, check voltage between Data Link Connector (DLC) terminal No. 16 and chassis ground. If battery voltage does not exist, check and repair junction connectors and wiring harness between DLC and power supply.
  2. If battery voltage exists, check for continuity between DLC terminal No. 4 and chassis ground, and between DLC terminal No. 5 and chassis ground. If continuity does not exist, check and repair wiring harness between DLC and chassis ground. If continuity exists, go to next step.
  3. Try a different scan tool adapter cable. If scan tool does not communicate, try scan tool on a known-good vehicle. If scan tool still does not communicate, replace scan tool.
scientia non olet · About LEMON Manuals