LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L Non-Turbo >> Circuit Tests >> DTC 11 - Generator Field Not Switching Properly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC 11 - Generator Field Not Switching Properly

NOTE: For component terminal identification, see TERMINAL IDENTIFICATION  in this article. For wiring diagrams, see WIRING DIAGRAMS  section.
  1. Using scan tool, perform ACTUATOR TEST No. 10 (MFI relay). If MFI relay operation can be heard, go to next step. If MFI relay operation cannot be heard, repair MFI relay circuit.
  2. Disconnect generator field coil connector. Check continuity between generator terminal No. 2 and generator housing. If continuity exists, repair or replace generator. If continuity does not exist, go to next step.
  3. Check PCM connector, wiring harness and junction connector between generator and PCM. If wiring and connectors are okay, replace PCM.
scientia non olet · About LEMON Manuals