LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Engine Controls - Tests W/Codes - Body Control Computer) >> Self-Diagnostic Tests >> Test 36A - EVIC Panel Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 36A - EVIC Panel Switch Test

WARNING: This page is about a different car, the 1995 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always turn ignition off prior to disconnecting or connecting any
NOTE: Perform TEST VER-1 after each repair.
  1. Using scan tool, read EVIC time switch status. If scan tool displays TIME SWITCH CLOSED, replace EVIC panel monitor. If scan tool does not display TIME SWITCH CLOSED, go to next step.
  2. Press and hold TIME button on EVIC panel. If scan tool does not display TIME SWITCH CLOSED, replace EVIC panel monitor. If scan tool displays TIME SWITCH CLOSED, go to next step.
  3. Release TIME button. Using scan tool, read Body Control Module (BCM) status. If scan tool displays NO RESPONSE, go to TEST 123A . If scan tool does not display NO RESPONSE, go to next step.
  4. If clock fails to operate properly, replace BCM. If clock operates properly, go to next step.
  5. Using scan tool, read EVIC temperature switch status. If scan tool displays TEMP SWITCH CLOSED, replace EVIC panel monitor. If scan tool does not display TEMP SWITCH CLOSED, go to next step.
  6. Press and hold TEMP button on EVIC panel. If scan tool does not display TEMP SWITCH CLOSED, replace EVIC panel monitor. If scan tool displays TEMP SWITCH CLOSED, go to next step.
  7. Release TEMP button. If a compass/temperature problem exists (if equipped with compass/temperature module), go to TEST 10A. If temperature/compass problem does not exist, go to next step.
  8. Using scan tool, read EVIC fuel switch status. If scan tool displays FUEL SWITCH CLOSED, replace EVIC panel monitor. If scan tool does not display FUEL SWITCH CLOSED, go to next step.
  9. Press and hold EVIC panel FUEL button. If scan tool does not display FUEL SWITCH CLOSED, replace EVIC panel monitor. If scan tool displays FUEL SWITCH CLOSED, go to next step.
  10. Release FUEL button. If DISTANCE TO EMPTY is not correct, go to TEST 36B. If DISTANCE TO EMPTY is correct, go to next step.
  11. Using scan tool, read EVIC US/M switch status. If scan tool displays US/M CLOSED, replace EVIC panel monitor. If scan tool does not display US/M CLOSED, go to next step.
  12. Press and hold US/M button on EVIC panel. If scan tool does not display US/M CLOSED, replace EVIC panel monitor. If scan tool displays US/M CLOSED, go to next step.
  13. Release US/M button. Using scan tool, read EVIC information switch status. If scan tool displays INFO SWITCH CLOSED, replace EVIC panel monitor. If scan tool does not display INFO SWITCH CLOSED, go to next step.
  14. Press and hold INFO button on EVIC panel. If scan tool does not display INFO SWITCH CLOSED, replace EVIC panel monitor. If scan tool displays INFO SWITCH CLOSED, go to next step.
  15. Release INFO button. Using scan tool, read EVIC set switch status, if scan tool displays SET SWITCH CLOSED, replace EVIC panel monitor. If scan tool does not display SET SWITCH CLOSED, go to next step.
  16. Press SET button on EVIC panel. If scan tool does not display SET SWITCH CLOSED, replace EVIC panel monitor. If scan tool displays SET SWITCH CLOSED, verify customer's complaint and retest system.
scientia non olet · About LEMON Manuals