Test 96A - Left Front Door Fails To Lock From Any Switch

WARNING: This page is about a different car, the 1995 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Always turn ignition off prior to disconnecting or connecting any module connector.

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagram, see WIRING DIAGRAMS - 3.0L article in ENGINE PERFORMANCE. Perform TEST VER-1 after each repair.

Gain access to Remote Keyless Entry (RKE) module, located behind rear seat. Turn ignition off. Disconnect RKE module Black connector. Go to next step.
Connect a jumper wire between RKE module Black connector terminal "G" (Dark Blue wire) and terminal "H" (Black wire). Press door lock switch to LOCK position. If left door locks, replace RKE module. If left door does not lock, repair open Black wire.