LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Engine Controls - Tests W/Codes - Body Control Computer) >> Self-Diagnostic Tests >> Test VER-1 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-1 - Verification Procedure

WARNING: This page is about a different car, the 1995 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect all previously disconnected components and connectors. Ensure all repairs have been made. Using scan tool, erase Diagnostic Trouble Codes (DTCs). Turn ignition off. Wait 5 seconds. Turn ignition on. Go to next step.
  2. Fully operate system that was malfunctioning by turning switch on, opening door, etc. If system does not operate properly, go to TEST 1A. If system operates properly, go to next step.
  3. Using scan tool, read body control module DTCs. If any DTCs return, go to TEST 1B. If no DTCs return, repair is complete.
scientia non olet · About LEMON Manuals