LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Engine Controls - Tests W/Codes - Body Control Computer) >> Vehicle Communications Tests >> Test VER-1 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-1 - Verification Procedure

WARNING: This page is about a different car, the 1995 Plymouth Neon, 1995 Eagle Talon, 1995 Dodge Neon, 1995 Dodge Avenger, and 1995 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect all components that were previously disconnected. Ensure ignition is off and scan tool is connected. Turn ignition on, engine off. If scan tool screen is blank, go to TEST 2A  . If scan tool screen is not blank, go to next step.
  2. Using scan tool, perform BUS test. If there is a bus failure message on scan tool, go to TEST 1A  . If there is no bus failure message on scan tool, select module in question. If scan tool shows NO RESPONSE, go to TEST 1A.
  3. If scan tool does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.
scientia non olet · About LEMON Manuals