BRAKELIGHT Switch
WARNING: This page is about a different car, the 1995 Chrysler New Yorker and 1995 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect brakelight switch 6-pin connector. Using an ohmmeter, check for continuity at switch side of connector terminals. With brakelight switch depressed, continuity should exist between terminals No. 1 and 2, and between terminals No. 3 and 4. With brakelight switch released, continuity should exist between terminals No. 5 and 6. See Figure . If continuity is not as specified, check brakelight switch adjustment. If switch adjustment is okay, replace defective brakelight switch.