A/C Switch & Compressor Clutch Relay
WARNING: This page is about a different variant/trim than selected.
Using DVOM, check A/C power supply voltage from PCM. Turn ignition to OFF position. Disconnect PCM connector. Turn A/C switch and ignition switch to ON positions. Check voltage between specified PCM terminals and chassis ground. See A/C POWER PCM TERMINAL IDENTIFICATION table. If battery voltage is not as present, check and repair circuit(s).
A/C POWER PCM TERMINAL IDENTIFICATION
| Application | (1) PCM Terminal No. | ||
|---|---|---|---|
| Summit Wagon | 22 & 115 | ||
| Galant | 22 & 45 | ||
| Pickup | 7 & 65 | ||
|
|||