LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Basic Testing - 2.4L 4-CYL) >> Ignition Checks >> Hall Effect & Optical Ignition >> Power Transistor (Pickup)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Transistor (Pickup)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect power transistor connector. Using a 1.5-volt dry cell battery, connect negative end of 1.5-volt battery to terminal No. 2 of power transistor and positive end to terminal No. 1. See Figure .
  2. Using an analog ohmmeter, check for continuity between terminals No. 2 and 3 of power transistor. Continuity should exist. With positive end of 1.5-volt battery disconnected, there should be no continuity. Replace power transistor if it fails test.
scientia non olet · About LEMON Manuals