Using Mut-III On Eclipse 420A (MTT-0408-01)
WARNING: This page is about the Eclipse GS-T, Automatic, which is a different variant/trim than selected.
Publication date: 1995-01-01Reference number: MTT-0408-01
USING MUT-III ON ECLIPSE 420A
TECHNICAL INFORMATION TIP - MANUFACTURER
Reference Number(s): MTT-0408-01, Date of Issue:
January 01, 1995
| MITSUBISHI MOTORS: | 1995 - 99 Eclipse w/420A Powertrain |
| GROUP: | 00 GENERAL |
SERVICE INFORMATION
USING MUT-III ON ECLIPSE 420A - 1995 - 99 Eclipse w/420A Powertrain . If you're having trouble using the MUT-III scan tool on 1995-99 Eclipse Coupes equipped with 420A engines, remember that both connectors of the Yellow Harness C must be connected to the vehicle. The MUT-III will only communicated in Scan Tool mode unless both connectors are plugged in. You also need to have the interface cartridge, MB991544, connected to the VCI.