DTC 11, DTC 12, DTC 13 Or DTC 14 - Faulty Wheel Speed Sensor Input
NOTE:
If after all testing procedures have been completed system is not functioning properly, substitute ECU with known-good unit and retest.
- DTC will set if ECU detects wheel speed sensor has no input signal. DTC will also set if wheel sensor voltage input is low while driving vehicle.
- Inspect condition of sensor rotor. Damaged rotor teeth can set DTC. Inspect wheel sensor wiring harness for open or poor connection. See WIRING DIAGRAMS . Repair or replace if necessary. If no open circuit or poor connection is found, go to next step.
- Test wheel speed sensor. See WHEEL SPEED SENSOR TESTING under COMPONENT TESTING. Replace wheel sensor as necessary. Ensure wheel speed sensor-to-rotor gap is within specification. See WHEEL SPEED SENSOR under ADJUSTMENTS.