April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control System Connectors

WARNING: This page is about a different car, the 1995 Dodge Stratus and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For terminal identification of body control system connectors, see Fig 1 -11. Connector terminal numbers are molded into connectors. If connector terminal identification differs from that shown in figure, use wire colors to ensure correct circuit is being tested. For wiring diagrams, see appropriate article in ENGINE PERFORMANCE:

WIRING DIAGRAMS - 2.0L & 2.4L

Fig 1: Identifying Body Control Module 10-Pin Connector Terminals

G95C14284

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Body Control Module 14-Pin Connector Terminals

G95D14285

Courtesy of CHRYSLER CORP.

Fig 3: Identifying Body Control Module 20-Pin Connector Terminals

G95E14286

Courtesy of CHRYSLER CORP.

Fig 4: Identifying Body Control Module 22-Pin Connector Terminals

G95F14287

Courtesy of CHRYSLER CORP.

Fig 5: Identifying Data Link Connector (DLC) Terminals

G95H14289

Courtesy of CHRYSLER CORP.

Fig 6: Identifying Instrument Cluster Connector Terminals

G95A14290

Courtesy of CHRYSLER CORP.

Fig 7: Identifying Ignition Switch Connector Terminals

G95B14291

Courtesy of CHRYSLER CORP.

Fig 8: Identifying Multifunction Switch 7-Pin Connector Terminals

G93G40614

Courtesy of CHRYSLER CORP.

Fig 9: Identifying Powertrain Control Module

G95I12680

Courtesy of CHRYSLER CORP.

Fig 10: Identifying Wiper Motor Connector Terminals

G95D14293

Courtesy of CHRYSLER CORP.