Diagnostic Procedure: Introduction
WARNING: This page is about a different car, the 1995 Dodge Stratus and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic test procedures are designed to detect system faults as quickly as possible. Body Diagnostic Trouble Codes (DTCs) are accessed through Data Link Connector (DLC). See Figure . Chrysler's Diagnostic Readout Box (DRB) scan tool or generic scan tool, is used to access information from DLC.
A 1995 diagnostic program cartridge, scan tool, body diagnostics cable, hand-held oil pressure gauge, jumper wires, and digital volt-ohmmeter will be needed for testing. Proceed to TEST 1A.
Ensure self-diagnostic tests apply to vehicle being tested. See BODY CONTROL COMPUTER TESTS DIRECTORY table. When system problem is identified according to customer's complaint, perform diagnostic test(s) indicated.