Body Control System Connectors

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For terminal identification of body control system connectors, see Fig 1 -7. Connector terminal numbers are molded into connectors. If connector terminal identification differs from that shown in figure, use wire colors to ensure correct circuit is being tested. For wiring diagrams, see appropriate article in ENGINE PERFORMANCE:

Fig 1: Identifying Body Control Module Connector Terminals

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Data Link Connector (DLC) Terminals

Courtesy of CHRYSLER CORP.

Fig 3: Identifying Message Center Connector Terminals

Courtesy of CHRYSLER CORP.

Fig 4: Identifying Powertrain Control Module & Transmission Control Module Connector Terminals

Courtesy of CHRYSLER CORP.

Fig 5: Identifying Relay Connector Terminals

Courtesy of CHRYSLER CORP.

Fig 6: Identifying Remote Keyless Entry (RKE) Module Connector Terminals

Courtesy of CHRYSLER CORP.