Test 85A - Testing OTIS Mileage & Distance Functions

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams, see appropriate article in ENGINE PERFORMANCE:

Drive vehicle to update OTIS and perform TEST VER-1 after each repair.

Using scan tool, read Body Control Module (BCM) DTCs. If scan tool displays NO VEHICLE SPEED SENSOR SIGNAL, see appropriate article in ENGINE PERFORMANCE:
- WIRING DIAGRAMS - 3.3L
- WIRING DIAGRAMS - 3.5L
  If scan tool does not display NO VEHICLE SPEED SENSOR SIGNAL, go to next step.
If scan tool displays THROTTLE POSITION SENSOR VOLTAGE HIGH, see appropriate article in ENGINE PERFORMANCE;
- WIRING DIAGRAMS - 3.3L
- WIRING DIAGRAMS - 3.5L
  If scan tool does not display THROTTLE POSITION SENSOR VOLTAGE HIGH, go to next step.
If scan tool displays THROTTLE POSITION SENSOR VOLTAGE LOW, see appropriate article in ENGINE PERFORMANCE:
- WIRING DIAGRAMS - 3.3L
- WIRING DIAGRAMS - 3.5L
If scan tool does not display THROTTLE POSITION SENSOR VOLTAGE LOW, replace BCM.