LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Cruise Control System) >> Testing >> Without Scan Tool >> Servo Vacuum
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Servo Vacuum

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cruise control cable from throttle body. Disconnect cruise control servo 4-pin connector. Disconnect vacuum hose at cruise control servo. Apply battery voltage to servo connector terminal No. 2 (Dark Blue/Red wire). Using jumper wires, ground remaining 3 terminals of servo connector.
  2. Connect hand-held vacuum pump to servo vacuum nipple, and apply 10-15 in. Hg of vacuum. Cruise control cable should retract and maintain position as long as vacuum is applied. If servo does not test as specified, replace servo.
scientia non olet · About LEMON Manuals