Removal & Installation
WARNING: This page is about a different car, the 1995 Mitsubishi Pickup, 1995 Mitsubishi Galant, 1995 Mitsubishi Expo, and 1995 Eagle Summit Wagon. However, it is still accessible from the selected car via links, so may be relevant.
- O2 sensor is mounted in exhaust pipe below exhaust header. It is equipped with a permanent pigtail which must be protected from damage when sensor is removed. Ensure sensor is free of contaminants. Avoid using cleaning solvents of any type.
- Sensor may be difficult to remove when engine temperature is less than 120°F (48°C). Always use anti-seize compound on threads before installation. Tighten O2 sensor to specification. See TORQUE SPECIFICATIONS .