LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Pickup Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Component Testing >> Closed Throttle Position Switch & Throttle Position Sensor >> Throttle Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor

  1. Disconnect sensor connector. Resistance between terminals No. 1 (Green/Yellow wire) and No. 4 (Green/Black wire) should be 3500-6500 ohms. Use an analog ohmmeter to measure resistance between terminals No. 2 (Green/White wire) and No. 4 (Green/Black wire).
  2. Slowly open throttle valve to wide open throttle. Resistance should change smoothly as throttle is opened. Replace throttle position sensor if it does not test correctly.
scientia non olet · About LEMON Manuals