Power Window Switch

Remove control switch from trim panel. Using ohmmeter, check continuity of switch. See MASTER WINDOW SWITCH CONTINUITY or PASSENGER-SIDE WINDOW SWITCH CONTINUITY . See Fig 1 and Fig 2 . Replace appropriate switch as necessary if switch continuity is not as specified.

MASTER WINDOW SWITCH CONTINUITY

Switch Position ⁽¹⁾

Check Continuity Between Pins No.

Normal Position

Left Front OFF

2, 6 & 9

Left Front UP

1 & 2; 6 & 9

Left Front DOWN

1 & 9; 2 & 6

Right Front OFF

3, 4 & 6

Right Front UP

1 & 4; 3 & 6

Right Front DOWN

1 & 3; 4 & 6

Lock Position

Left Front OFF

2, 6 & 9

Left Front UP

1 & 2; 6 & 9

Left Front DOWN

1 & 9; 2 & 6

Right Front OFF

3 & 4

Right Front UP

1 & 4

Right Front DOWN

1 & 3

⁽¹⁾	Left side of vehicle refers to driver's side.

PASSENGER-SIDE WINDOW SWITCH CONTINUITY

Switch Position	Check Continuity Between Pins No.
OFF	3 & 8; 5 & 7
UP	3 & 8; 5 & 9
DOWN	3 & 9; 5 & 7

Fig 1: Power Window Connector Terminals (Main Switch)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Power Window Connector Terminals (Sub-Switch)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.