Ignition Switch Test
Remove upper and lower steering column covers. Disconnect ignition switch 6-pin harness connector. Check continuity between ignition switch terminals. See IGNITION SWITCH CONTINUITY TEST table. Replace ignition switch if necessary.
IGNITION SWITCH CONTINUITY TEST
| Switch Position & Terminal No. | Test Condition | |
|---|---|---|
| Lock | ||
| All Terminals | No Continuity | |
| ACC | ||
| 1 & 6 | Continuity | |
| ON | ||
| 1, 2, 4 & 6 | Continuity | |
| START | ||
| 1, 2, 3 & 5 | Continuity | |