DTC 92 - Low Speed Fan Control Relay Circuit
NOTE:
For terminal identification, see TERMINAL IDENTIFICATION
in SELF-DIAGNOSTICS section. For circuit and wire color identification, see WIRING DIAGRAMS - 2.0L - NON-TURBO
article.
- Disconnect PCM connectors. Turn ignition on. Check voltage between ground and PCM A-107 connector terminal No. 55. If battery voltage exists, go to next step. If battery voltage does not exist, check radiator fan relay circuit.
- Turn ignition off. Connect jumper wire between ground and PCM A-107 connector terminal No. 55. Turn ignition on. If radiator fan runs, check PCM connectors. If PCM connectors are okay, replace PCM. If radiator fan does not run, check radiator fan relay circuit.