LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1998 >> Montero >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 Eclipse, Endeavor, GALANT >> Pattern 12 >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle for 3 minutes.
  3. Drive the vehicle for 30 seconds at the following conditions. (During the monitor)
    • Engine speed: More than 1,800 r/m
    • Engine load: More than 30%, less than 80%
    • Throttle position sensor output: Less than 3.0 volts
    • Except fuel cut
  4. Stop the safe place and turn the ignition switch to "LOCK" (OFF) position.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals