DTC Set Criteria

At least 2 seconds have passed since engine started. Closed throttle position switch is on. Code will set if TP sensor output voltage is 2 volts or more for 2 seconds. Or TP sensor output voltage is .2 volt or less for 2 seconds.
At least 2 seconds have passed since engine started. Engine speed is 500-3000 RPM. Volumetric efficiency is 30 percent or less . Code will set if TP sensor output is 4.6 volts or more for 2 seconds.
At least 2 seconds have passed since engine started. Engine speed is more than 2000 RPM. Volumetric efficiency is 60 percent or more. Code will set if TP sensor output is 800 millivolts or less for 2 seconds.