LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1999 >> Eclipse GSX, Standard >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 OUTLANTER 3.0L >> Pattern 17 >> Test Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle at more than 50 km/h (31 mph) for 30 seconds. (During the monitor)
  3. Stop the vehicle at the safe place and turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals