LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2000 >> Diamante ES >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Traction Control >> Component Tests >> Wheel Speed Sensor >> Sensor Resistance Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Resistance Test

  1. Before testing sensor resistance, ensure pole piece-to-wheel speed sensor tip is clean. Check wheel sensor pole piece for damage. If pole piece is damaged, replace sensor.
  2. Disconnect sensor connector. Inspect sensor wiring harness for broken and pinched wires. Repair or replace as necessary. Using a DVOM, check sensor resistance across terminals at sensor component connector. Resistance should be 1.4-1.8 k/ohms. If resistance is not within specification, replace sensor. If resistance is within specification, go to GROUND CIRCUIT TEST  .
scientia non olet · About LEMON Manuals