LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2000 >> Eclipse GS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Circuit Tests >> Scan Tool Will Not Communicate >> No Communication With All Systems
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No Communication With All Systems

  1. Check voltage between ground and OBD-II Data Link Connector (OBD-II DLC) terminal No. 16. If battery voltage exists, go to next step. If battery voltage does not exist, repair connectors and/or wiring between OBD-II DLC and power supply.
  2. Check resistance between ground and OBD-II DLC terminals No. 4 and 5. If each resistance is less than 2 ohms, repair or replace scan tool. If either resistance is 2 ohms or more, repair wiring between ground and OBD-II DLC.
scientia non olet · About LEMON Manuals