LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2000 >> Eclipse GT, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments >> Throttle Position (TP) Sensor & Accelerator Pedal Position Sensor >> TP Sensor Adjustment >> Diamante With Traction Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diamante With Traction Control

  1. If using scan tool, connect scan tool to OBD-II Data Link Connector (OBD-II DLC). If not using scan tool, backprobe and connect DVOM (voltmeter) leads to TP sensor connector terminals No. 3 (sensor output) and No. 1 (sensor ground). See Fig 1. Go to next step.
  2. Turn ignition on. Check TP sensor output voltage. TP sensor output voltage should be 580-690 millivolts. If TP sensor output voltage is not as specified, go to next step.
  3. Loosen TP sensor mounting bolts and rotate TP sensor body until TP sensor output voltage is within specifications. Hold TP sensor and tighten mounting bolts.
Fig 1: Identifying TP Sensor Connector & Accelerator Pedal Position Sensor Connector Terminals
G93I78137Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals