Activating/Deactivating Hazard Answerback Function Using RKE Transmitter Only

Ensure key is removed from ignition. While pressing UNLOCK button for 4-10 seconds, pushed LOCK button on RKE transmitter. Go to next step.
To activate or deactivate hazard answerback function customization feature when doors are unlocked, go to next step. To activate or deactivate hazard answerback function customization feature when doors are locked, release LOCK button then UNLOCK button on RKE transmitter. ETACS-ECU will sound indicating that it is ready to be switched. Push LOCK button on RKE transmitter again to activate or deactivate hazard answerback function. If ETACS-ECU sounds once when LOCK button is pushed, hazard answerback function is enabled. If ETACS-ECU sounds 2 times when LOCK button is pushed, hazard answerback function is disabled.
To activate or deactivate hazard answerback function customization feature when doors are unlocked, release UNLOCK button then LOCK button on RKE transmitter. ETACS-ECU will sound indicating that it is ready to be switched. Push UNLOCK button on RKE transmitter again to activate or deactivate hazard answerback function. If ETACS-ECU sounds ones when UNLOCK button is pushed, hazard answerback function is enabled. If ETACS-ECU sounds 2 times when UNLOCK button is pushed, hazard answerback function is disabled.
To exit hazard answerback function customization feature, disconnect scan tool, disconnect jumper wire, turn ignition switch to position other than LOCK or open driver's door. If system remains inactive for at least 3 minutes after ETACS-ECU has entered customize mode, hazard answerback function customization feature will cancel automatically.