Toe-In Adjustment: Front
NOTE:
On Eclipse Spyder models, rear wheel alignment should be performed prior to adjusting front toe-in.
Check front toe-in. See appropriate WHEEL ALIGNMENT SPECIFICATIONS table. If front toe-in is not within specification, remove clips, and turn left and right tie rod turnbuckles same amount, but in opposite directions. Toe will move out as left turnbuckle is turned toward front of vehicle, and right turnbuckle is turned toward rear of vehicle. Recheck front toe-in.
NOTE:
For each turn of left and right tie rod turnbuckles, toe-in changes about 1.08 degrees. Tie rod outer turnbuckles have left-hand threads. Ensure length of left and right tie rods are within .20" (5.0 mm) of each other.