DTC Set Criteria
- The manifold absolute pressure sensor outputs a voltage which corresponds to the intake manifold plenum pressure.
- For DTC P0106, ignition switch is on. Code will set when Manifold Absolute Pressure (MAP) sensor output voltage is 4.5 volts or more for 2 seconds. Throttle Position (TP) sensor voltage is 1.25 volts or more. Engine speed is 4000 RPM or less. Code will set when MAP sensor output voltage is 200 millivolts or less for 2 seconds.
- For DTC P0107, ignition switch is on. Code will set when TP sensor voltage is 3.5 volts or more. Engine speed is 2000 RPM or more. Code will set when MAP sensor output voltage is 1.1 volt or less for 2 seconds.
- For DTC P0108, ignition switch is on. Code will set when TP sensor voltage is 800 millivolts or less. Engine speed is 2000 RPM or less. Code will set when MAP sensor output voltage is 4 volts or more for 2 seconds.