DTC Set Conditions
- Check Conditions - Engine is being cranked. Battery positive voltage is between 10-16 volts.
- Judgement Criteria - The EGR solenoid coil surge voltage (battery positive voltage plus 2 volts) is not detected for 0.2 second. Only one monitor per drive cycle.
- Check Conditions - Battery positive voltage is between 10-16 volts. ON duty cycle of the EGR solenoid is between 10-90%. ON duty cycle of the evaporative emission purge solenoid is 0%. Evaporative emission ventilation solenoid is OFF. More than 1 second has elapsed after the above mentioned conditions have been met.
- Judgement Criteria - The EGR solenoid coil surge voltage (battery positive voltage plus 2 volts) is not detected for 1 second.