DTC P0108: Barometric Pressure Circuit High Input: Operation
A 5-volt voltage is supplied to the BARO sensor power terminal (terminal No. 1) from the ECM (terminal No. 81) or PCM (terminal No. 46 - A/T). The ground terminal (terminal No. 5) is grounded with ECM (terminal No. 40) or PCM (terminal No. 16 - A/T). A voltage that is proportional to the atmospheric pressure is sent to the ECM (terminal No. 85) or PCM (terminal No. 55 - A/T) from the BARO sensor output terminal (terminal No. 2).