Dome Light: Notes

With the dome light switch in the "door controlled operation" (middle) position, the ETACS-ECU controls the dome light operation as follows:

• When a door is opened from outside or inside [with the ignition switch turned to "LOCK" (OFF)]: When a door is opened, the ETACS-ECU causes the dome light to be illuminated at 100 percent intensity. When the door is closed, it dims the dome light to 65 percent intensity and approximately 30 seconds later, turns out the light completely. During this period (timer controlled period), the dome light goes out if the ignition switch is turned "ON" or the doors are locked.
• When a door is opened or closed with the ignition switch in the "ON" position: The dome light illuminates at 100 percent intensity when a door is opened and turned out when it is closed.
• When no door is opened and the ignition key is removed: The dome light is illuminated at 100 percent intensity and turned off approximately 30 seconds later. During that time (timer-controlled period), the dome light goes out if the ignition key is inserted and turned to "ON" or the door locking system is activated.
• Dome light's answerback operation in response to door lock control by keyless entry system: To allow the driver to confirm the doors have locked by the keyless entry system, the ETACS-ECU causes the dome light to blink twice when the doors are locked by the RKE system and to illuminate for approximately 15 seconds when the doors are locked. The dome light's answerback operation in response to a keyless entry system control action is accompanied by flashing of the hazard warning lights.