Service Data Reference Tables: Lighting
Service Data Reference Table - Lighting (1 Of 2)
| ITEMS | ITEM NO. | INPUT SIGNALS | DISPLAY ON SCAN TOOL | NORMAL CONDITIONS |
|---|---|---|---|---|
| H/L AUTO-CUT | 00 | Headlight switch | HEADLIGHT SW | Either is on |
| 01 | Tail light switch | TAIL LIGHT SW | ||
| 30 | Ignition switch (IG1) | IGSW (IG1) | OFF | |
| 32 | Front door switch | FRONT DOOR SW | ON | |
| 35 | Headlight automatic shutdown function | H/L AUTO-CUT | ON | |
| 70 | Response by the front-ECU | FRONT ECU ACK | NORMAL ACK or HI-BEAM ACK | |
| OFF | 00 | Headlight switch | HEADLIGHT SW | OFF |
| 01 | Tail light switch | TAILLIGHT SW | OFF | |
| 03 | Passing light switch | PASSING SW | OFF | |
| 04 | Automatic lighting switch | AUTOLAMP SW | OFF | |
| 30 | Ignition switch (IG1) | IGSW (IG1) | ON | |
| 35 | Headlight automatic shutdown function | H/L AUTO-CUT | OFF | |
| 70 | Response by the front-ECU | FRONT ECU ACK | NORMAL ACK or SLEEP ACK |
Service Data Reference Table - Lighting (2 Of 2)
| ITEMS | ITEM NO. | INPUT SIGNALS | DISPLAY ON SCAN TOOL | NORMAL CONDITIONS |
|---|---|---|---|---|
| HEADLIGHT HI | 00 | Headlight switch | HEADLIGHT SW | ON |
| 02 | Dimmer switch | DIMMER SW | ON | |
| 03 | Passing light switch | PASSING SW | ON | |
| 30 | Ignition switch (IG1) | IGSW (IG1) | ON | |
| 35 | Headlight automatic shutdown function | H/L AUTO-CUT | OFF | |
| 70 | Response by the front-ECU | FRONT ECU ACK | HI-BEAM ACK | |
| HEADLIGHT LO | 00 | Headlight switch | HEADLIGHT SW | ON |
| 03 | Passing light switch | PASSING SW | OFF | |
| 30 | Ignition switch (IG1) | IGSW (IG1) | ON | |
| 35 | Headlight automatic shutdown function | H/L AUTO-CUT | OFF | |
| 70 | Response by the front-ECU | FRONT ECU ACK | NORMAL ACK | |
| PASSING LIGHT | 03 | Passing light switch | PASSING SW | ON |
| 70 | Response by the front-ECU | FRONT ECU ACK | NORMAL ACK or HI-BEAM ACK | |
| TAILLIGHT | 00 | Headlight switch | HEADLIGHT SW | OFF |
| 01 | Tail light switch | TAILLIGHT SW | ON | |
| 03 | Passing light switch | PASSING SW | OFF | |
| 30 | Ignition switch (IG1) | IGSW (IG1) | ON | |
| 35 | Headlight automatic shutdown function | H/L AUTO-CUT | OFF | |
| 70 | Response by the front-ECU | FRONT ECU ACK | NORMAL ACK | |
|
NOTE:
When checking the input signals (off, tail, low-beam or high-beam), turn the ignition switch to the "ON" position in order to disable the headlight automatic shutdown function. However, the headlight operation does not depend on the ignition switch positions, the scan tool does not display the title "IGNITION SWITCH". For checking item "HI (High-beam)", the scan tool displays "OFF" on the item No.2 "Dimmer SW" when the headlights are at high-beam. Therefore, the scan tool should display "ON" momentarily when the dimmer switch is operated.
|
||||