LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2002 >> Montero XLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> On-Vehicle Service >> Enabling/Disabling ANSWERBACK Function >> Enabling/Disabling Hazard Answerback Function >> When The Transmitter Is Used After Connecting Scan Tool MB991502 To The Data Link Connector Or Grounding Data Link Connector Terminal No. 1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When The Transmitter Is Used After Connecting Scan Tool MB991502 To The Data Link Connector Or Grounding Data Link Connector Terminal No. 1

  1. Set switches to the following conditions:
    • Hazard Warning Light Switch: OFF
    • Diagnosis Control: ON (Connect scan tool MB991502 or MB991958 to the data link connector, or connect the data link connector terminal No. 1 to ground.)
    • Key Reminder Switch: OFF (Insert The Ignition Key)
    • Ignition Switch: "LOCK" (OFF)
    • Driver's Door Switch: OFF (Driver's Door Closed)
  2. If the windshield washer switch remains on for 10 seconds or more, the tone alarm incorporated in the ETACS-ECU sounds once, and then enter the adjustment mode.
scientia non olet · About LEMON Manuals