LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Eclipse GS, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>G<< Synchronizer Sleeve Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>G<< Synchronizer Sleeve Installation

  1. Check the installation direction of the synchronizer sleeve, and install it onto the 3rd-4th speed synchronizer hub.
    Fig 1: Identifying Installation Direction Of Synchronizer Sleeve
    G01928565Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install the synchronizer sleeve so that the areas with teeth that have raised tips (three areas total) are aligned with the areas on the synchronizer hub that have deep grooves between the teeth (three areas total).
    Fig 2: Aligning Synchronizer Sleeve Teeth With Raised Tips To Synchronizer Hub Deep Grooves Between Teeth
    G01928566Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals