INSPECTION PROCEDURE 3: When the Ignition Key is Turned to the "ON" Position (Engine Stopped), the TCL Warning Light does not Illuminate.: Notes

Fig 1: Circuit Diagram - TCL Warning Light And TCL Indicator Light (1 Of 2) - Inspection Procedure 3

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: CONNECTOR LOCK SWITCH.

1. ON: The ABS-ECU connector A-02 is connected.
2. OFF: The ABS-ECU connector A-02 is disconnected.

Fig 2: Circuit Diagram - TCL Warning Light And TCL Indicator Light (2 Of 2) - Inspection Procedure 3

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.