LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Eclipse GT, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Basic Diagnostic Procedures >> Fuel System >> Fuel Pressure >> Using Fuel Pressure Gauge
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Using Fuel Pressure Gauge

  1. Remove the union joint and bolt from Adaptor Hose (MD998709) and instead, attach Hose Adaptor (MB998742) to the adaptor hose.
  2. Place a suitable O-ring or gasket on assembled adaptor hose and hose adaptor and install the fuel pressure gauge.
  3. Install the assembled fuel pressure measurement tools between the fuel rail and high-pressure fuel hose. See Fig 1.
Fig 1: Installing Fuel Pressure Gauge
G00229862Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals