DTC Set Conditions
- Check Conditions - Engine is being cranked. Battery positive voltage is between 10-16 volts.
- Judgement Criteria - The variable induction control solenoid coil surge voltage (battery positive voltage +2 volts) is not detected for 0.2 seconds. The ECM (M/T) or PCM (A/T) monitors for this condition once during the drive cycle.
- Check Conditions - Battery positive voltage is between 10-16 volts. Variable induction control solenoid is ON. More than 1 second has elapsed after the above mentioned conditions have been met.
- Judgement Criteria - The variable induction control solenoid coil surge voltage (battery positive voltage +2 volts) is not detected for 1 second. When the variable induction control solenoid is turned OFF.