INSPECTION PROCEDURE 4: The TCL Indicator Light Remains Illuminated after the Engine is Started.: Notes

NOTE: This diagnosis procedure is limited to cases where communication with the scan tool is possible (ABS-ECU power supply is normal) and no diagnostic trouble code outputs.

Fig 1: Circuit Diagram - TCL Warning Light And TCL Indicator Light (1 Of 2) - Inspection Procedure 4

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: CONNECTOR LOCK SWITCH.

1. ON: The ABS-ECU connector A-02 is connected.
2. OFF: The ABS-ECU connector A-02 is disconnected.

Fig 2: Circuit Diagram - TCL Warning Light And TCL Indicator Light (2 Of 2) - Inspection Procedure 4

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.