DTC Set Conditions

Check Conditions - Engine is being cranked. Battery positive voltage is between 10-16 volts.
Judgement Criteria - The evaporative emission purge solenoid coil surge voltage (battery positive voltage +2 volts) is not detected for 0.2 seconds. The ECM (M/T) or PCM (A/T) monitors for this condition once during the drive cycle.
Check Conditions - Battery positive voltage is between 10-16 volts. ON duty cycle of the evaporative emission purge solenoid is between 10-90%. ON duty cycle of the EGR solenoid is 0%. Evaporative emission ventilation solenoid is OFF. More than 1 second has elapsed after the afore mentioned conditions have been met.
Judgement Criteria - The evaporative emission purge solenoid coil surge voltage (battery positive voltage +2 volts) is not detected for 1 second. When the evaporative emission purge solenoid is turned OFF.