DTC Set Conditions
- Check Conditions - Engine is being cranked. Battery positive voltage is between 10-16 volts.
- Judgement Criteria - The evaporative emission ventilation solenoid coil surge voltage (battery positive voltage +2 volts) is not detected for 0.2 seconds. The ECM (M/T) or PCM (A/T) monitors for this condition once during the drive cycle.
- Check Conditions - Battery positive voltage is between 10-18 volts. ON duty cycle the evaporative emission purge solenoid is 0%. ON duty cycle of the EGR solenoid is 0%. Evaporative emission ventilation solenoid is ON. More than 1 second has elapsed after the afore mentioned conditions have been met.
- Judgement Criteria - The evaporative emission ventilation solenoid coil surge voltage (battery positive voltage +2 volts) is not detected for 1 second. When the evaporative emission ventilation solenoid is turned OFF.