LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer ES, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> On-Vehicle Service - Except Evolution >> A/T Key Interlock And Shift Lock Mechanisms >> Removal And Installation >> Installation Service Points >> >A<< Shift Lock Cable (Selector Lever Side) Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>A<< Shift Lock Cable (Selector Lever Side) Installation

  1. Shift the selector lever in the "P" position.
  2. Fasten the shift lock cable at the position where the end of the shift lock cable is positioned above the red marking on the lock cam.
    Fig 1: Installing Shift Lock Cable (Selector Lever Side)
    G01876059Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Check the operation of the selector lever. (Refer to SELECTOR LEVER OPERATION CHECK  .)
scientia non olet · About LEMON Manuals