LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer ES, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Anti-Lock Brake System & Traction Control System - Abs/TCS) >> Actuator And Electric Unit (Assembly) >> Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Installation

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: After installation of ABS actuator and electric unit (control unit), refill brake fluid. Then bleed air from system. Refer to "BLEEDING BRAKE SYSTEM ".
  1. Position ABS actuator and electric unit (control unit) in vehicle.
  2. Connect brake pipes and fixing nuts temporarily.
  3. Tighten fixing nuts, bolts and brake pipes.
  4. Connect ABS actuator and electric unit (control unit) harness connectors.
  5. Install windshield wiper and linkage assembly. Refer to "INSTALLATION ".
  6. Reconnect battery cable.
scientia non olet · About LEMON Manuals