LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer ES, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Manual Transaxle Overhaul - Evolution) >> Transmission Case >> Disassembly And Assembly >> Assembly Service Points >> >> A << Bushing Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> A << Bushing Installation

WARNING: This page is about a different variant/trim than selected.
  1. Press fit the bushing so the seam is away from the air vent.
    Fig 1: Identifying Seam Of Bushing And Air Vent
    G01869876Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Be sure the bushing is fully seated as shown. It must be 3 mm (0.12 inch) below the housing surface.
Fig 2: Identifying Clearance Between Bushing And Housing Surface
G01869877Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals