DTC Set Conditions
If the resistance value for the overdrive solenoid valve circuit is greater than 3.5 ohm (open) or less than 2.6 ohm (short) for 4 seconds, DTC 34 is set. The transaxle is locked into 3rd gear as a fail-safe measure.
If the resistance value for the overdrive solenoid valve circuit is greater than 3.5 ohm (open) or less than 2.6 ohm (short) for 4 seconds, DTC 34 is set. The transaxle is locked into 3rd gear as a fail-safe measure.