LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Manual Transaxle Overhaul - Evolution) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> I << Snap Ring Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> I << Snap Ring Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the slinkiest snap ring that can be fitted in the groove of output shaft.
  2. Make sure that the 3rd speed gear end play meets the standard value.
    1. Standard value: 0 - 0.09 mm (0 - 0.0035 inch)
Fig 1: Installing Snap Ring
G01869834Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals