LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul - Evolution >> Center Differential >> Disassembly And Assembly >> Assembly Service Points >> >> D << Differential Drive Gear Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

>> D << Differential Drive Gear Installation

  1. Apply sealant (3M™ AAD Part Number 8730 or 8731 or equivalent) to the entire threaded portion of the bolt.
    Fig 1: Applying Sealant To Threaded Portion Of Bolt
    G01869889Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Tighten to the specified torque in the illustrated sequence.
    1. Tightening torque: 133 +/- 4 N.m (98 +/- ft-lb)
    Fig 2: Identifying Tightening Sequence Of Differential Drive Gear
    G01869890Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals